Internet Info 1994 March

home *** CD-ROM | disk | FTP | other *** search

/ Internet Info 1994 March / Internet Info CD-ROM (Walnut Creek) (March 1994).iso / answers / comp / postscript / faq / part1-4 < prev next >

Wrap

Text File | 1994-04-12 | 48.6 KB | 1,187 lines

Newsgroups: comp.lang.postscript,comp.answers,news.answers Path: bloom-beacon.mit.edu!news.media.mit.edu!uhog.mit.edu!news.intercon.com!howland.reston.ans.net!pipex!uunet!brunix!doorknob.cs.brown.edu!jgm From: Jonathan Monsarrat <postscript-request@cs.brown.edu> Subject: PostScript monthly FAQ v2.2 12-26-93 [01-04 of 11] Content-Type: text Message-ID: <JGM.94Apr11234438@chekov.cs.brown.edu> Followup-To: poster Summary: Useful facts about the PostScript graphics programming language Sender: news@cs.brown.edu Supersedes: <JGM.93Apr16124153@vegas.cs.brown.edu> Reply-To: postscript-request@cs.brown.edu (PostScript FAQ comments address) Organization: Brown University Department of Computer Science Mime-Version: 1.0 Date: Tue, 12 Apr 1994 04:44:38 GMT Approved: news-answers-request@MIT.Edu Expires: Thu, 12 May 1994 00:00:00 GMT Lines: 1169 Xref: bloom-beacon.mit.edu comp.lang.postscript:9150 comp.answers:4866 news.answers:17932 Archive-name: postscript/faq/part1-4 Last-modified: 1993/12/26 Version: 2.2 -- PostScript -- Answers to Questions (the comp.lang.postscript FAQ v2.2) Jon Monsarrat jgm@cs.brown.edu This FAQ is formatted as a digest. Most news readers can skip from one question to the next by pressing control-G. Changes since the last version are marked with a '|' in the table of contents and in the sections in the text-only format of the FAQ. Now that there is Linux and NetBSD and BSD 386 UNIX IBM PC (and clone) users can run any of the X-windows and UNIX programs in the utilities section. See comp.os.linux. Also, there is now GhostScript for the Macintosh. Many thanks to Dan Carrigan for reformatting the books and publishers section. The utilities index from the comp.sources.postscript FAQ will be posted in comp.lang.postscript now too. Please help fix the FAQ! All comments should be mailed to jgm@cs.brown.edu. My favorite way to receive a change suggestion is when it is accompanied by a section of the FAQ that is edited and mailed to me verbatim as an example. If you would like to contribute, please read the section ``about the FAQ'' first. Thank you! Books and programs are referred to by name only. See the book sections for book information, and the comp.sources.postscript FAQ for a full list of all PostScript related programs. I have archived a number of the small utilities in wilma.cs.brown.edu:pub/postscript. You can get the comp.sources.postscript FAQ from wilma.cs.brown.edu:pub/comp.sources.postscript. Related FAQs: comp.text, comp.text.tex, comp.fonts, comp.graphics, comp.sys.mac.apps, comp.sources.postscript. Table of Contents This FAQ has 11 sections. It is available by anonymous ftp to wilma.cs.brown.edu:pub/comp.lang.postscript/FAQ.txt in ASCII, and there are also LaTeX, DVI, and PostScript formats. 1 General Questions | 1.1 What is PostScript? 1.2 How can I tell how many pages my document will have? 1.3 How can I print just one page or a few pages from a big 1.4 How can I print more than one page per sheet of paper? | 1.5 How can I edit a PostScript picture? 1.6 How can I print PostScript on a non-PostScript printer? | 1.7 How do I print a file containing 8-bit characters? 1.8 What other graphics languages are there? 2 Printers 2.1 How can I get my printer to talk back to me? | 2.2 Should I leave my printer on? | 2.3 How do you print double-sided on a single-sided printer? 2.4 How do I suppress the power-on start page? 2.5 How do I make a downloaded font ``persistent''? 2.6 How do I remove a persistent (``permanent'') downloaded font? 2.7 How do I reset the printer without power-cycling? 2.8 About saving files | 2.9 What's the control-D business? 2.10 Why does the printer say ``still busy'' when my document is 2.11 How should I set up my spoolers? | 2.12 What are PPD files? | 2.13 What's a timeout error? 3 Formats and Conversions 3.1 How can I convert PostScript to some other graphics format? | 3.2 How can I convert HPGL to PostScript? 3.3 How can I convert DVI to PostScript? 3.4 How can I convert HP Laserjet language (PCL) to PostScript? 3.5 How can I convert TeX PK format font to PostScript? 3.6 How do I embed PostScript into troff? 3.7 How do I embed PostScript into LaTeX or TeX? 3.8 How can I convert an image to PostScript? 3.9 How can I convert ASCII text to PostScript? 3.10 How can I convert PostScript to ASCII? | 3.11 How do I convert between PFB, PFA, Mac, PFM, and AFM? 4 Fonts | 4.1 What are .PFB and .PFA files? | 4.2 How does Macintosh Store PostScript Fonts? 4.3 How can I convert a PostScript font to TeX's PK format? 4.4 Why are Adobe fonts hidden? 4.5 How do I get bitmap representations of Adobe fonts? 4.6 What are some good ftp sites for fonts? 4.7 How can I re-encode a font? 4.8 What's the difference between a Type 1 and a Type 3 font? | 4.9 What vendors sell fonts for PostScript printers? 4.10 What are ATM fonts? 4.11 What are Multiple Master Fonts? 4.12 Do I need a Level Two printer to use Multiple Master Fonts? 4.13 What are Type 4 fonts? 4.14 What are Type 5 fonts? 4.15 Is there an editor for Type 1 Fonts? 5 Books 5.1 Books 5.2 Publishers 6 About Adobe 6.1 How do I get in touch with Adobe? 6.2 What can Adobe do for me? 7 Programming in PostScript 7.1 What is PostScript level 2? 7.2 Should I learn level 2 PostScript? 7.3 Where can I find examples of PostScript code? 7.4 What is the physical size of the page? 7.5 What is the Imagable Area of the page 7.6 Why can't I do a pathforall after a charpath ? 7.7 How do I center a string of text around a point? 7.8 How can I concatenate two strings together? 7.9 What do I do when I get stack overflow/underflow? 7.10 How can I print in landscape mode? 8 Computer-specific PostScript 8.1 Sun Workstations 8.2 IBM PC 8.3 Apple Macintosh 9 Encapsulated PostScript 9.1 What is Encapsulated PostScript? 9.2 What are EPSI and EPSF? 9.3 How do I convert PostScript to EPS? 9.4 How do I get the bounding box of a PostScript picture? 10 About The Comp.Lang.PostScript FAQ (and Usenet Guide to 10.1 The PostScript FAQ: What is it? 10.2 How to get the FAQ files 10.3 How to write a FAQ answer 10.4 The FAQ can contain LaTeX and PostScript inserts 10.5 Revising the FAQ 10.6 How to submit new information 10.7 How to add a program description to the FAQ index 10.8 How to add a book description to the FAQ 10.9 Questions that need answers 11 About PostScript 2 11.1 What printers support Level 2 PostScript? 11.2 What is PostScript Level 2? 11.3 [ Color Extensions ] 11.4 [ Composite Font Extensions ] 11.5 [ Display PostScript Extensions ] 11.6 [ Overview of Level 2 Features ] 11.7 Filters 11.8 Binary Encoding 11.9 Optimized graphics operators 11.10 Optimized text operators 11.11 Forms 11.12 Patterns 11.13 Images 11.14 Composite Fonts 11.15 New Color Spaces 11.16 New screening/halftoning technology 11.17 Improved printer support features 11.18 Interpreter parameters 11.19 Resources 11.20 Dictionaries 11.21 When did Level 2 products come available? 11.22 Are Level 1 and Level 2 implementations compatible? Subject: 1 General Questions Subject: 1.1 What is PostScript? PostScript is a page description programming language. It is perhaps the most versatile and loved language for printers, being used in printers world-wide. It is capable of drawing to computer screens and any kind of drawing device. PostScript is interpreted, stack based and has latent typing. It somewhat resembles the computer language FORTH. A number of programmers write PostScript programs directly for a | variety of drawing applications. The NeXTSTEP Operating System, | running on Intel-486 and Motorola machines, uses Display | PostScript Level II to manage the display. However, PostScript programs are usually documents meant to be printed that have been generated by a program written in some compiled language. Subject: 1.2 How can I tell how many pages my document will have? The easiest way to count pages is view your document on-line with a PostScript previewer. Some previewers like Ghostview and GSPreview count the pages for you. (See the comp.sources.postscript FAQ, which has a section ``PostScript Interpreters and Utilities''.) If your document is generated by a program compliant with the Document Structuring Conventions, you should be able to just count the number of ``%%Page:'' comments imbedded in the document. With UNIX you can type grep -c %%Page: document.ps to do this counting. (See Section 9, ``Encapsulated PostScript''.) The only completely reliable way to count pages is to ask the printer after the job is printed. PostScript printers maintain a page counter that can be queried before and and after the job is printed, and the page count is a simple subtraction. This tends to require rather sophisticated spooling systems and a communications channel that is bidirectional. However, some printers allow you to submit jobs on one port, and issue queries on another. Send this PostScript through a bidirectional I/O port and you'll get back the page count, nominally the total number of pages printed since manufacture: statusdict begin pagecount == end flush Experts using a level 2 printer can use the SerialOff.PS and SerialEHandlder.ps programs to communicate bidirectionally to the printer. Subject: 1.3 How can I print just one page or a few pages from a big document? How can I print pages in reverse order? Try using a host-specific program, like the UNIX command psrev, which is part of the TranScript suite of software from Adobe Systems. Or use the more general utilities Ghostview, psutils or psxlate. There is no guarantee that a given PostScript document can be split in such a manner. The reason is that some programs which generate PostScript code don't conform to the Adobe Document Structuring Conventions (DSC). (See Section 9, ``Encapsulated PostScript''.) A notable example of this is Microsoft Word. Subject: 1.4 How can I print more than one page per sheet of paper? Use psnup or pstext or enscript. These programs redefine the PostScript ``showpage'' command to do multiple PostScript pages per physical page. If one program doesn't work with a complex document, try out other ones. Some PostScript programs can't work with these programs because they break the EPS conventions (See Section 9, ``Encapsulated PostScript''.). The reason is that some Postscript operators (such as initgraphics, the list is in the Red book) change the printer state so "violently", that software trying to do things like n-up will get confused. Theoretically, an EPS shouldn't have any of these operators, but it may not really be an EPS, or there may be a weird interaction between TeX, the EPS and the inclusion mechanism that breaks psnup. Subject: 1.5 How can I edit a PostScript picture? If you know the PostScript programming language, just use any text editor to edit the code directly. If you want to do it visually, you can use Canvas on the Macintosh. | Arts Letters software package from Computer Support Corporation is | supposed to be able to read arbitrary EPS files, using a software | converter called Decipher. Also, Island Graphics has a trio of | software packages called, appropriately, Island Draw/Paint/Write. | This is also supposed to include a full-blown PostScript | interpreter, and be able to read and edit arbitrary PostScript | files. Subject: 1.6 How can I print PostScript on a non-PostScript printer? You need a tool that converts to something that your printer knows how to print. Use Freedom of Press, GhostScript, pageview, TScript, or UltraScript PC. Or, use a printer cartridge if your printer manufacturer sells one. Subject: 1.7 How do I print a file containing 8-bit characters? | If you only have Transcript you just don't. Transcript uses | "enscript" to convert a "text" file to a PostScript file and | "enscript" is not able to deal with 8-bit characters. | | You have to use one of the many programs that convert text to | PostScript, like a2ps, which not only handles the 8-bit characters | in a very nice way using the standard ISO Latin 1 character | encoding, but it also produces outputs in a series of very well | set, nice an paper saving formats, much nicer than the ones | produced by enscript. Subject: 1.8 What other graphics languages are there? HPGL is for pen plotters. PCL is for HP Laser printers (and compatibles). Both are by HP, and PCL5 is supposed to allow inclusion of HPGL commands, preceded by an appropriate escape code, however I have found this to give errors and abort even for simple HPGL code that plots fine on a plotter. Subject: 2 Printers Subject: 2.1 How can I get my printer to talk back to me? Experts using a level 2 printer can use the SerialOff.PS and SerialEHandlder.ps programs to communicate bidirectionally to the printer. If you just need the error returns from the printer, you can spawn a cat < port >> logfile& in your system startup. Then you will get a log of everything the printer says. This works on any serial-port connected printer. Subject: 2.2 Should I leave my printer on? | Most laser printers consume several hundred watts while idle in | order to keep the fuser warm. A few models shut down automatically | after a while, and this feature seems to be the wave of the future. | | Wear-and-tear due to power cycling is no longer the problem it once | was. The advice in the FAQ would have been appropriate in the | 1970s, but no longer. A good modern rule of thumb is to turn off | electronic equipment if it won't be used for a few hours (overnight | or weekends), otherwise to leave it on. Subject: 2.3 How do you print double-sided on a single-sided printer? | The biggest problem comes in jamming when you feed the document | through the second time to print the backside. To minimize this | problem, you want to minimize the curl that the paper acquires in | passing through the printer. So, if your printer normally stacks | face down (to make the page order come out right) rearrange it | (often this involves flipping out a plastic paper catcher on the | end) so the pages feed straight through and stack face up. Then | acquire and build psutils, and run your document through the | following commands: | |0' <original.ps >odd.ps | pstops '2:1U@1(1w,1h)' <original.ps >even.ps | | This puts the even and odd pages in different files, and rotates | the even pages 180 degrees so the top and bottom are reversed. This | lets you feed the paper back through with the old trailing edge at | the front; since pages get the most severe curl at the leading edge | this also helps reduce jamming. Print odd.ps, flip the output pile | face down and backwards, put it back in the input magazine, and | print even.ps. | | If the printer is fed by a shared print queue, you can leave the | paper magazine out after you put the first pass pages into it, | before you submit the second half, then make sure your job is at | the front of the queue (waiting for you to replace the paper tray) | before you reinsert the tray. | | Alternatively, particularly with serially-interfaced printers, | there's a long enough delay to pull the paper tray out between two | print jobs, so you can submit them both, then pull the tray out as | soon as the last page of the first job finishes. The ``pstops'' | invocations report how many pages they emit, so you can count pages | to determine when the first one is done. Subject: 2.4 How do I suppress the power-on start page? Disabling the start page is described in your printer's PostScript supplement. The most common sequence is ``serverdict begin 0 exitserver statusdict begin false setdostartpage end''. Subject: 2.5 How do I make a downloaded font ``persistent''? %!PS-Adobe-2.0 ExitServer %%BeginExitServer: 0 serverdict begin 0 exitserver %%EndExitServer % Test for existence of font, abort if present. % This won't work on a printer with a hard disk! /str 32 string def /Eurostile dup FontDirectory exch known { str cvs print ( is already loaded!\n) print flush quit } { (loading font ) print str cvs print (\n) print flush } ifelse %% Font follows... The part following ``%%EndExitServer'' is optional. If you use it, change Eurostile to the name of the font. The default PFA behavior is to use up additional VM for the new copy if another copy has already been downloaded. Subject: 2.6 How do I remove a persistent (``permanent'') downloaded font? In PostScript Level 2, you can use the undefinefont operator to remove fonts selectively. The only reliable method in PostScript Level 1 is to restart the printer, for example with: serverdict begin 0 exitserver systemdict /quit get exec Of course, the real solution is just to not download persistent fonts unless you really want them to persist indefinitely. If you want them only for one job, download them as part of the job. Subject: 2.7 How do I reset the printer without power-cycling? Most printers can be reset by issuing ``serverdict begin 0 exitserver systemdict /quit get exec''. Subject: 2.8 About saving files Adobe recommends that driver writers do not put EOT (control-D) into files when saving to disk. Normally, the EOT is a part of the protocol for parallel and serial ports and never hits the PostScript interpreter. Drivers that do embed EOD can create problems for devices that allow other communication methods (e.g. AppleTalk, Ethernet, and SCSI) where the EOT is not part of the communications protocol. It is useful to redefine EOT in these instances so that the interpreter does not generate an error. The recommended redefinition is: (\004) cvn {} def This should convert any stand-alone embedded EOTs into a null procedure. Subject: 2.9 What's the control-D business? PostScript printers communicating over serial lines use control-D as an end of job indicator. The host computer should then wait for the printer to send a control-D back to indicate that the job has finished. Managing the serial protocol between host and printer should be done by some form of print service, but if you're unsure whether your print service is doing it, it's an idea to send one yourself. PC type computers frequently do not have any kind of printer manager and applications end up sending control-D characters to the printer, sometimes before and after a job. PC applications frequently embed a control-D as the first character in the print file, presumably to flush out any other jobs, and thereby breaking | the Adobe Document Structuring Conventions. There is a way to turn | off generation off the control-D in Windows (anybody know it?). If you want to prevent applications from doing this, you could use a spooler which would look at the end of every outgoing file and drop the control-D on the end if there happened to be one. If you want a spooler, check out lprps. Subject: 2.10 Why does the printer say ``still busy'' when my document is done printing? Sometimes when you finish a print job, the printer ``Ready'' light keeps flashing for a minute or so. Somehow, the printer has received some character(s) after the control-D which was sent immediately after the PostScript file. The most common is that a newline has been inserted after the control-D. The printer took these character(s) to be another program, and eventually timed-out while waiting for the rest of it. This can happen because of the host not waiting for the printer to finish. Subject: 2.11 How should I set up my spoolers? Since PostScript usually is prefixed with ``%!'', it's easy to educate your spooler to autoselect between passing raw PostScript through to the printer or doing an ``ASCII-to-PostScript'' conversion first. There are many packages that will do this, including Transcript and psxlate. Unfortunately, many PostScript applications generate PostScript without a proper ``%!'' magic cookie. The spooler should be responsible for transmitting the ``job termination code'' (a control-D on serially-connected printers) to the printer, not the application. Do yourself a favor and disable (or filter out) control-Ds in your applications and generate them in the spooler. This will be far more reliable in the face of arbitrary input. Subject: 2.12 What are PPD files? Adobe Postscript Printer Description (PPD) files describe how to use the special features for a specific Postscript printer. They are suppose to be human-readable, but they are really only readable by PostScript gurus. It is the responsibility of the printer manufacturer to supply PPD files. However, the Adobe mail server has many of them. (see the Section 6, ``About Adobe'') | Adobe Technical Document 5003 - PPD Specification describes how to | read and parse PPD files. You can find it on the Adobe mail server, | or by anonymous ftp to | ftp.adobe.com:/pub/adobe/Documents/5003.PPD_Spec.ps. Subject: 2.13 What's a timeout error? | The wait timeout is the maximum time the PostScript interpreter | will wait for input before aborting. The timeout interval begins | when the interpreter finishes executing everything it has received | so far and starts waiting for the host to send it more data. If | this timeout expires and no more data arrives, a timeout occurs. | | In particular, a compute-bound job (or one that goes into an | infinite loop) will not encounter a wait timeout, since it is not | waiting. The long diatribe about the need to "keep sending stuff" | and problems with long compute-bound jobs is totally off the mark. | The data channel may stop due to flow control, and may stay stopped | for long periods if the printer is very busy. This is perfectly OK | and won't cause a timeout. | | Don't disable the wait timeout. The whole point of the wait timeout | is to prevent the interpreter from being indefinitely tied up by a | host application that has crashed, a communication channel that has ected, or whatever. This is particularly important for | networked printers. The only situation in which disabling timeouts | is appropriate is when debugging applications or drivers, since you | don't want the printer timing out while the host is at a breakpoint | or something. Subject: 3 Formats and Conversions This section describes formats that can be converted to and from PostScript, and how to convert them. Encapsulated PostScript and Fonts have their own sections. Subject: 3.1 How can I convert PostScript to some other graphics format? Since PostScript is not just a picture-description language, but in fact a complete programming language, you will need a complete PostScript interpreter to convert or display a PostScript graphic. See the comp.sources.postscript FAQ for an index of all PostScript related programs. Try using GhostScript. Subject: 3.2 How can I convert HPGL to PostScript? | Use hp2ps. Subject: 3.3 How can I convert DVI to PostScript? Use dvips. Subject: 3.4 How can I convert HP Laserjet language (PCL) to PostScript? Use lj2ps for simple PCL. Alternatively, another lj2ps, from psroff3.0, is a little more complete. hp2pbm can convert all of PCL4 (up to and including rasters, downloaded fonts and macros) into PostScript, G3 and any other PBM-supposed format. Subject: 3.5 How can I convert TeX PK format font to PostScript? Psroff3.0 contains programs that can convert TeX PK format or HP SFP format fonts into PostScript bitmap fonts along with rearranging encoding, etc. While bitmap bfonts scale poorly, this is sometimes of use in special circumstances. Subject: 3.6 How do I embed PostScript into troff? Most troffs can be ``coerced'' into including PostScript figures. The best approach is a configuration that takes EPS PostScript and can automatically scale it, or tell troff how big the picture is. Groff and DWB 3 have this built in. psfig is an add-on EPS inclusion handler that can add this capability to other versions of troff, provided that a compatible PostScript driver is used (Psroff 3.0 for ditroff or CAT troff, Transcript for ditroff). See the comp.text FAQ for more detail. Subject: 3.7 How do I embed PostScript into LaTeX or TeX? You should use an add-on program for seamless PostScript inclusion. Use psfig. If your LaTeX is simple, but your PostScript is fancy, try using LameTeX. If you need a good compromise, use pstricks. See the comp.text.tex FAQ. Subject: 3.8 How can I convert an image to PostScript? First determine what format your images are in. PBMPLUS will have converters for most image formats. To convert an image to PostScript in X windows, you can display the image on the screen, and grab it with xv, which can save the image in a PostScript file. A more general alternative in X windows would be to use the PPM, PGM and PBM utilities in the X11R4 and X11R5 distributions. Subject: 3.9 How can I convert ASCII text to PostScript? Unless your printer is smart about raw ASCII, you can't just send the ASCII to a PostScript printer, because the printer will attempt to interpret your ASCII file as PostScript code. You need a program which will wrap some PostScript code around your ASCII file. Try any of the following programs: asciiprint.ps, ato2pps, cz, ETSR, i2ps, lpp, lwf, POSTPRN, printer, psf, psfx80, PSR, ps2txt, pstext, swtext, text2ps, TranScript, spike.ps, enscript, nenscript, a2ps, asc2ps, ascii2ps, crossword.ps, double.ps, landscape.ps, numbered.ps, portrait.ps, or wide.ps. If you want to make something fancy, why not use a word processor? Most of them can ``include'' ASCII directly from a file and produce PostScript. Subject: 3.10 How can I convert PostScript to ASCII? In general, when you say ``I want to convert PostScript to ASCII'' what you really mean is ``I want to convert MacWrite (which makes PostScript output) to ASCII'' or ``I want to convert somebody's TeX document (which I have in PostScript) to ASCII''. Unfortunately, programs like these (if they're smart) do a lot of fancy stuff like kerning, which means that where they would normally execute the postscript command for ``print water fountain'' instead they execute the postscript command for ``print wat'' (move a little to get the spacing *just* right) ``print er'' (move a little to get the spacing *just* right) ``print foun'' (move a little to get the spacing *just* right) ``print tain'' (move a little to get the spacing *just* right) So if I write a program to look through a PostScript file for strings, like ps2ascii.pl, It can't tell where the words really end. Here my program would see 4 strings ``wat'' ``er'' ``foun'' ``tain'' And it doesn't see any difference between the spacing between ``found'' and ``tain'' (not a word break) and the spacing between ``er'' and ``foun'' (a real word break). The problem is that PostScript for text formatting is usually produced machine generated by a text formatter. A PostScript generator like dvips might have a special command like ``boop'' that differentiates between a real world break and a fake one. But every text formatter that generates PostScript has their own name for the ``boop'' command. So you really want a ``PostScript to ASCII converter for dvips output''. The only general solution I can see would be to redefine the show operator to print out the currentpoint for every letter being printed, like gs2asc, and then make up an ASCII page based on this by sticking ASCII characters where they go in a two-dimensional array. That would convert PostScript to ASCII ``formatted''. But even that wouldn't solve the problem, because special bitmap fonts and and standard fonts like Symbol don't always print a ``P'' when you say the letter ``P''. Sometimes they print the greek Pi symbol or a chess piece or a ZapfDingBat. Use ps2a, ps2ascii, ps2txt, ps2ascii.ps or ps2ascii.pl. Subject: 3.11 How do I convert between PFB, PFA, Mac, PFM, and AFM? Write or call Y and Y Software, listed in the fonts section as a | vendor. For NEXTSTEP systems, write or call Trilithon Software, | also listed in the fonts section as a vendor. Subject: 4 Fonts This section answers questions about fonts as they pertain to PostScript. See the comp.fonts FAQ for more information about fonts. Subject: 4.1 What are .PFB and .PFA files? ``PFB'' stands for Printer Font Binary, and is a STORAGE FORMAT in which Adobe Type 1 font programs are usually distributed for IBM PC and compatibles. Many application programs support fonts in PFB format, and refer to them as ``downloadable''. Macintosh uses a radically different binary storage format than PC. See below for some details. PFB files usually appear in several sections, each section preceded by a binary header containing the type of the section (ASCII, binary, or end of file) and the length of the section. Because of the presence of the binary section headers, and the possible presence of binary data sections, PFB files cannot in general be sent directly to a PostScript printer. Application programs like dvips which use fonts in PFB format unpack the font into ASCII format before sending it to the printer. If you would like to use a font which is in PFB format, you must unpack the font to make a PFA (Printer Font ASCII) file. Adobe Systems supply a font downloader for PC's which turns the PFB format into PFA format on the fly as it's being downloaded. ``PFA'' stands for Printer Font ASCII, which is the unpacked version of a PFB file. In PFB, the data is stored as-is. In a PFA, any binary data present in a former PFB file is stored as ``ascii hex''--meaning each byte of binary data is turned into two ASCII characters representing the hexdecimal value. Once you have the PFA file, just send it to the printer ahead of your file, and use the font like any other. There are several programs which can do the conversion from PFB to PFA for you. Try t1utils. | Details of the PFB format can be found in Adobe Technical Note # | 5040, ``Supporting Downloadable PostScript Fonts''. Subject: 4.2 How does Macintosh Store PostScript Fonts? | To start off understanding how Macintosh stores PostScript fonts, | first you need to know that a Macintosh file consists of two | different parts, called ``forks''. The two forks of a Macintosh | file are called the ``resource fork'' and the ``data fork''. | | The data fork normally contains the data of the file. In the case | of a text editor, for instance, the data fork contains the text. | | The resource fork contains system (resource) information about the | file: who owns the file, its icon maybe, and other information. The | various bits of information in the resource fork are contained in a | complex structure. One of the items is a resource map, detailing | the different kinds of resources and their positions in the | resource fork. | | The reason you need to know all this is because PostScript Type 1 | fonts are stored in the resource fork of Macintosh files. Why this | was done is a historical mystery now, because the information could | just as easily have been stored in the data fork in a format | similar to PFB, and unpacking fonts would have been a whole lot | easier. | | PostScript Type 1 fonts are stored in resources with the name | POST''. If you aren't familiar with the layout of resource forks, | study the ``Resource Manager'' chapter of the Inside Macintosh | books. Details of Macintosh PostScript Type 1 storage format can be | found in Adobe Technical Note 5040, ``Supporting Downloadable | PostScript Fonts''. The information in the Adobe Technical Note is | incomplete in the sense that you need to understand the layout of | Macintosh resource forks to make sense of the information. | | In the majority of cases, you can assume that the POST resources | are stored contiguously in the resource fork. Unfortunately, there | are a few cases where this isn't true, and the resulting PFA file | will be incorrect. | | POST resources occur in five types. Type 0 are comments. Type 1 are | ASCII data. Type 2 are binary data. Type 3 are end of this font | program. Type 4 means that the remainder of this font appears in | the data fork of the file! Type 5 means end of file. | | Having talked about PostScript Type 1 fonts being stored in the | resource fork, why is there a case where the font comes out of the | data fork? Some PostScript Type 3 fonts are stored in this manner. Subject: 4.3 How can I convert a PostScript font to TeX's PK format? Use ps2pk or try out the GNU font utilities in fontutils. Subject: 4.4 Why are Adobe fonts hidden? In PostScript level 1, Adobe's fonts were hidden because they didn't want people pirating copies instead of paying for them. That's why you can't do a pathforall on a charpath. PostScript Level Two has removed the restriction, in the words of the new Red Book, ``for most fonts''. There will still be some vendors who will want to restrict access. Japanese font vendors, for example, are concerned about piracy -- given the work that goes into an 8,000-character Kanji font. Subject: 4.5 How do I get bitmap representations of Adobe fonts? On the IBM PC, use the Font Foundry program included with the font. If you don't have it, contact Adobe for an upgrade. Subject: 4.6 What are some good ftp sites for fonts? ftp.cs.umb.edu sumex-aim.stanford.edu archive.umich.edu ftp.cica.indiana.edu /pub/pc/win3/fonts colonsay.dcs.ed.ac.uk /pub/postscript/fonts For the NeXT platform, fonts are available on the NeXT-FTP-archives, sonata.cc.purdue.edu :/pub/next/graphics/fonts fiasko.rz-berlin.mpg.de :/pub/next/fonts For Macintosh, look in sumex-aim.stanford.edu, mac.archive.umich.edu, and ftp.cs.umb.edu (192.12.26.23), in pub/tex/ps-screenfonts.tar.Z. Color PostScript samples and many other PostScript programs are available from irisa.irisa.fr. Subject: 4.7 How can I re-encode a font? See ddev.ps for an example for code that does this. You can find it by ftp to wilma.cs.brown.edu:pub/postscript/ddev.ps. Subject: 4.8 What's the difference between a Type 1 and a Type 3 font? The Type 1 font format is a compact way of describing a font outline using a well-defined language that can be quickly interpreted. The language contains operations to provide the rasterizer with additional information about a character, known as hints. The hints are additional information which describes how to adjust the representation of the character to make it look good when the font size is small compared to the device resolution. The Type 1 font format is defined in the book ``The Adobe Type 1 Font Format'', also known as the black book, for the colors on its cover. The Type 1 font format has nothing to do with TrueType, which is another font format defined by Apple. The Type 1 font format has been around quite a while, and is used on a wide variety of platforms to obtain scalable fonts. Most clone interpreters will not have Adobe's proprietary rendering technology which interprets font hints to improve the appearance of fonts shown at small sizes on low-resolution devices. The exceptions (PowerPage and UltraScript) have their own hint interpreters. The Type 3 font format is a way of packaging up PostScript descriptions of characters into a font, so that the PostScript interpreter can rasterize them. It is easier to create a Type 3 font program by hand than to create the corresponding Type 1 font program. Type 3 font programs have access to the entire PostScript language to do their imaging, including the 'image' operator. They can be used for bitmapped fonts, although that is certainly not a requirement. The Type 3 font format contains no provisions for 'hinting', and as such Type 3 font programs cannot be of as high a quality at low resolutions as the corresponding Type 1 font program. Both formats are scalable formats, and both can be run on any PostScript interpreter. However, because of the requirement that a Type 3 font program have a full PostScript interpreter around, Type 3 font programs cannot be understood by the Adobe Type Manager. Only Type 1 font programs can. Why bother making a font that's just made up of bitmaps? Once a character from a font has been rendered, the bitmap will be saved in a cache, and another instance of the same character at the same size and orientation can be quickly drawn without recalculation. Because of Adobe Type Manager's wide availability on a large number of platforms (PC, Mac, and Unix), the Type 1 font format makes an excellent cross-platform scalable font standard. Subject: 4.9 What vendors sell fonts for PostScript printers? PostScript font vendors are many and varied. Here is a partial list. Adobe Systems sells a variety of fonts. With the huge number of third-party Type 1 vendors, in recent years Adobe have specialized in creating their own ``Adobe Originals'' -- high-quality fonts, some of which are their renditions of classic faces (Adobe Garamond) and some of their own devising (Stone, Utopia, ...). Adobe Systems, 1585 Charleston Road, Mountain View, CA 94039. (415) 961-4400 AGFA Compugraphic, ts 01887. (508) 658-5600. Bear Rock Technologies specializes in bar code fonts. 4140 Mother Lode Drive, Suite 100, Shingle Springs California 95682. Bitstream, Athenaeum House, Cambridge, MA 02142. (617) 497-6222. | Callifonts | has a really nice looking set of calligraphy typefaces. P.O. Box | 224891, Dallas, TX 75222. (214) 504-8808. Casady and Greene, 22734 Portola Drive, Salinas, CA 93908. (408) 484-9228. Ecological Linguistics, specializes in non-Roman alphabets. Ecological Linguistics, P. O. Box 15156, Washington D. C. 20003. Emigre Graphics 4475 ``D'' Street / Sacramento CA 95819 (800) 944 9021 ] Over 70 faces, all PostScript Type 1 ATM compatible, including the omnipresent Modula and infamous Template Gothic. Almost all faces are ``must haves'' for graphic designers. Call for free catalog. | The Font Company | 12629 North Tatum Boulevard, Suite 210, Phoenix Arizona 85032. | (602) 998-9711. Image Club, # 5 1902 11th St Southeast, Calgary, Alberta T2G 2G2, Canada. (403) 262-8008. | Lanston | specializes in display faces. Letraset specializes in fancy kinds of script fonts, Letraset, 40 Eisenhower Drive, Paramus, New Jersey 07652. (201) 845-6100 Linguists Software specializes in non-Roman alphabets (Farsi, Greek, Hangul, Kanji, etc.) Linguists Software, P. O. Box 580, Edmonds, Washington 98020-0580. (206) 775-1130. Monotype, 53 West Jackson Boulevard, Suite 504, Chicago, IL 60604. Page Studio Graphics, Chandler, Arizona, specialize in symbols fonts such as Mac icons, keyboards, and others, Page Studio Graphics, 3175 North Price Road, # 1050, Chandler, Arizona 85224. (602) 839-2763. | Software Complement | specializes in creating logo fonts. 8 Penn Avenue, Metamoras, | Pennsylvania 18366 USA. | The Font Company | TreacyFaces | Trilithon Software, | Portola Valley, California can supply fonts from the Adobe Type | library for NEXTSTEP. If you're working on NEXTSTEP, getting | fonts in the correct form with ancillary information and | downloaders and such is important. You can convert Mac fonts to | NEXTSTEP (PFA) format, but NEXTSTEP demands AFM files as well, | and many Mac/PC font vendors omit AFM files because Mac/PC apps | don't use them. For Adobe fonts for NEXTSTEP, save yourself a lot | of hassle by getting the fonts from Trilithon. | | If you want non-Adobe fonts for NEXTSTEP, Trilithon Software can | supply font conversion tools to go from Macintosh or PC format to | NEXTSTEP format. The conversion tools generate AFM files if none | are supplied with the fonts, and sanity check AFM files for | correctness when they are supplied. | | Two Ohlone, Portola Valley, California 94028 USA. Telephone: | (415) 325-0767, FAX: (415) 325-0768. E-Mail: info@trilithon.com. URW supplies high-quality fonts at low prices. They are also the creators of the top of the line font creation and editing software called Ikarus. URW, 4 Manchester Street, Nashua, New Hampshire 03060. (603) 882-7445. Y and Y Software , 106 Indian Hill, Carlisle Massachusetts 10741 USA. (508) 371-3286. Sells a Font Metric Manipulation Package for DOS with lots of interesting utilities. Many more font vendors exist. Look in magazines and other sources. Check the Usenet newsgroup comp.fonts. Look in U & lc, published by ITC, for long lists of vendors. Subject: 4.10 What are ATM fonts? There has been a rash of misunderstanding about the nature of Type 1 fonts and what people call ATM fonts. ATM fonts are Adobe Type 1 fonts. ATM stands for Adobe Type Manager -- a utility to render smooth characters on Macintosh and PC screens, from font outlines (Type 1 fonts) instead of using bitmap fonts. In one sense, there's no such thing as an ``ATM font'' -- ATM interprets Type 1 fonts, so there's no need to create a new name. A correctly constructed Type 1 font can be interpreted by ATM. Subject: 4.11 What are Multiple Master Fonts? Multiple Master Fonts are an extension to the Adobe font format. providing the ability to interpolate smoothly between several ``design axes'' from a single font. Design axes can include weight, size, and even some whacko notions like serif to sans serif. Adobes' first Multiple Master Font was Myriad -- a two-axis font with WEIGHT (light to black) on one axis, and WIDTH (condensed to expanded) along the other axis. In the case of Myriad, there are four ``polar'' designs at the ``corners'' of the design space. The four designs are light condensed, black condensed, light expanded, and black expanded. Given polar designs, you can set up a ``weight vector'' which interpolates to any point within the design space to produce a unique font for a specific purpose. So you can get a ``more or less condensed, somewhat black face''. Subject: 4.12 Do I need a Level Two printer to use Multiple Master Fonts? No -- Multiple Master Fonts can be used on any PostScript printer. Multiple Master Fonts need a new PostScript operator known as makeblendedfont. The current crop of Multiple Master Fonts supply an emulation of this operator so the printer doesn't need this operator. A short tutorial on Multiple Master Fonts and makeblendedfont appears in PostScript by Example, by Henry McGilton and Mary Campione, published by Addison-Wesley. Subject: 4.13 What are Type 4 fonts? Type 4 fonts are actually Type 3 fonts which contains a Type 1 font. They're stored on hard disk in a special way to save space when they're loaded into printer RAM by findfont. Your interpreter must have the extra PostScript operator CCrun to handle Type 4 fonts. They are usually used for Kanji (Japanese) characters. Subject: 4.14 What are Type 5 fonts? Type 5 fonts are actually Type 1 fonts, but stored in printer ROM in a special compressed format. They're also known as CROM fonts (for Compressed ROM fonts). The contents of the CharStrings entries in Type 5 will probably be different from Type 1. Subject: 4.15 Is there an editor for Type 1 Fonts? Fontographer for the Macintosh and MS-Windows under DOS is available from Altsys Corporation, 269 West Renner Road, Richardson, Texas 75080 USA. (214) 680-2060. Ikarus-M is availble for the Macintosh from URW, Harksheider Strasse 102, 2000 Hamburg 65, GERMANY. (040) 60 60 50 Or URW Software and Type, 4 Manchester Street, Nashua, New Hampshire 03060. (800) 229-8791 in USA. (603) 882-7445 otherwise. Acknowledgments This FAQ was compiled based heavily on the contributions of and with the help of Henry McGilton, Dick Dunn, Howard Gayle, Dan Carrigan, Carl Orthlieb, Ed Garay, Robert Lerche, Bruno Hall, Tom Epperly, and Chris Lewis. Also thanks to contributors Paul Balyoz, Karl Berry, Jerry Black, Charles Cashion, Jim DeLaHunt, Leonard Hamey, Chris Herborth, Steve Kinzler, Bill Lee, Timo Lehtinen, Carl Lydick, Otto Makela, Bill Pringle, Tony Valsamidis, and Jamie Zawinski. Special thanks to Ken Porter, who originally compiled and organized this FAQ. Ver Date Reason ---------------------------------------------------------------- 1.00 12-18-90 Creation by Ken Porter 1.06 5-29-91 expanded on EPS explanation, general updates 2.00 10-25-92 Brought up to date and expanded, by Jon Monsarrat 2.1 5-21-93 Revised because of new comp.sources.postscript group. 2.2 12-26-93 Finally incorporated all the '93 comments and suggestions. This FAQ is copyright (C) 1994 by Jonathan Monsarrat. Permission is granted to freely edit and distribute as long as this copyright is document was written with the LaTeX language and formatted by LameTeX, the PostScript hacker's LaTeX. %! Jon Monsarrat jgm@cs.brown.edu moderator, comp.sources.postscript %! (LcHdBidZi_hdQ6[PaVa1b4c6F"J4b/>$O<)(di_zk{:UFfUg;ABF)(2n>]Eh:u?<)(P"M#R(:$T<) ([gXfSZ]f"dZbeZeb^fH;`?dR=ZS7)(K P!U!: H<)(9l9cCf:o?$)(7W4]6`:X;=)(U"W#_%:"R-) (A 5"<&Y%K"F"M,M,S)i3e.M5F_PZR9>lP-)(wBxEuEs7x;uBq:q<q>hFh7o:=Nj<)(Z#]#b#:$R-) (m+m+k3S!R+d,;"^<)(GFP"RamZf;TAP{X{fd<{C7)(4840N2:6N=)([ Z#^&:!c<)(<%?$C$:#8<) (D!J"L#:!B<)/a{def}def/M{exch}a/S{repeat}a/Q{{40 add}if}a 18{{}forall/R M a/x 2 /y 3/z 5 3{R M mod 1 eq a}S x Q M y Q moveto 57 sub{3{y Q M x Q M 6 2 roll}S curveto}S z{fill}{stroke}ifelse}S showpage